Machined alu countersunk shims for use on XRAY Quick Saver™. Set of 4. 

Ultimate assortment of set-up shims. You can use the shims for easy and accurate adjustment of:
- front and rear roll center
- front bump steer
- front and rear toe-in
- wheelbase  

Ultimate assortment of set-up shims. You can use the shims for easy and accurate adjustment of:
• front and rear roll center
• front bump steer
• front and rear toe-in
• wheelbase  

Alu shims 3x6mm size, 0.5mm thick. Black color. Set of 10. 

Alu shims 3x6mm size, 0.5mm thick. Orange color. Set of 10. 

Alu shims 3x6mm size, 1mm thick. Silver color, set of 10. 

Alu shims 3x6mm size, 1mm thick. Black color, set of 10. 

Alu shims 3x6mm size, 1mm thick. Orange color, set of 10. 

Alu shims 3x6mm size, 2mm thick. Silver color, set of 10. 

Alu shims 3x6mm size, 2mm thick. Black color, set of 10. 

Alu shims 3x6mm size, 2mm thick. Orange color, set of 10. 

Alu shims 3x6mm size, 3mm thick. Set of 10. 

Alu shims 3x6mm size, 3mm thick. Black color. Set of 10. 

Alu shims 3x6mm size, 3mm thick. Orange color. Set of 10. 

Alu shims 3x6mm size, 5mm thick. Black color, set of 10. 

Aluminum CNC-machined shock collars that can be used on the XRAY shock absorbers to increase the durability. Stylish and lightweight collars are CNC-machined from premium Swiss 7075 T6 aluminum and are strategically lightened. 

Aluminum shock collars for use on XRAY shock absorbers to increase durability.  

Aluminum CNC-machined shock collars that can be used on the XRAY shock absorbers to increase the durability. Stylish and lightweight collars are CNC-machined from premium Swiss 7075 T6 aluminum and are strategically lightened. Set of four. Orange color. 

Set of four alu. spring-tension adjusting nuts and four O-rings to be inserted in them. O-rings prevent adjusting nuts from coming loose. 

CNC-machined aluminum shock lower cap for #308322 shock body. Set of two. 

One frame containing composite parts (except pistons) for two T4 SLP aluminum shock absorbers. 

Machined alu upper shock cap for XRAY Shock Absorber-Set 4-Step. Set of 2.

The upper aluminum cap features a small vent hole that makes shock assembly very predictable and easy, since excess shock oil will escape through this vent hole.  

A complete set of 4 chassis balancing weights (2x 5g + 2x 10g) and mounting hardware. Designed for XRAY electric & nitro touring car to be mounted at pre-drilled chassis holes; also fits other race cars as well. Made from steel and laser engraved with the weight value for easy identification. 

Molded composite holder for integrated chassis weights or chassis inserts. Set of 6. 

Aluminum brake post arm allows more direct and precise braking. Ultra-strong construction provides very long life and durability. CNC-machined from premium Swiss 7075 T6 aluminum.  

CNC-machined from premium Swiss 7075 T6 aluminum, this new brake post arm allows more direct and precise braking.  

XRAY precision molded 53T spur gear (2nd gear) made from special composite material which gives the spur gear an optimum balance of hardness, toughness, and flexibility thus providing long life, minimal wear, and minimizing breakage or teeth stripping. The spur gear remain strategically lightened to reduce rotating mass. The special composite material will withstand even the most extreme racing conditions which imparts high tension on the spur gears. 

XRAY precision molded 54T spur gear (2nd gear) made from special composite material which gives the spur gear an optimum balance of hardness, toughness, and flexibility thus providing long life, minimal wear, and minimizing breakage or teeth stripping. The spur gear remain strategically lightened to reduce rotating mass. The special composite material will withstand even the most extreme racing conditions which imparts high tension on the spur gears. 

XRAY precision molded 57 spur gear (1st gear) made from special composite material which gives the spur gear an optimum balance of hardness, toughness, and flexibility thus providing long life, minimal wear, and minimizing breakage or teeth stripping. The spur gear remain strategically lightened to reduce rotating mass. The special composite material will withstand even the most extreme racing conditions which imparts high tension on the spur gears. 

XRAY precision molded 58 spur gear (1st gear) made from special composite material which gives the spur gear an optimum balance of hardness, toughness, and flexibility thus providing long life, minimal wear, and minimizing breakage or teeth stripping. The spur gear remain strategically lightened to reduce rotating mass. The special composite material will withstand even the most extreme racing conditions which imparts high tension on the spur gears. 

XRAY precision molded 60 spur gear (1st gear) made from special composite material which gives the spur gear an optimum balance of hardness, toughness, and flexibility thus providing long life, minimal wear, and minimizing breakage or teeth stripping. The spur gear remain strategically lightened to reduce rotating mass. The special composite material will withstand even the most extreme racing conditions which imparts high tension on the spur gears. 

Medium springs for #335540 Composite 2-Speed Gear Box Set allows for medium 2nd gear engagement point. Set of 2. 

XRAY precision-molded spur gear (2nd gear, module 0.8). 

XRAY precision-molded spur gear (2nd gear, module 0.8).

 

XRAY precision-molded spur gear (2nd gear, module 0.8). 

XRAY precision-molded spur gear (1st gear, module 0.8). 

XRAY precision-molded spur gear (1st gear, module 0.8).

 

XRAY precision-molded spur gear (1st gear, module 0.8).
 

XRAY precision-molded spur gear (1st gear, module 0.8). 

Molded rubber receiver case crystal cover. 

Smart, stylish and functional, this optional receiver bracket is a direct replacement for the molded composite receiver case. The bracket is CNC-machined from premium-quality woven graphite material, and a composite antenna tube mount and all necessary mounting hardware complete the set. 

Complete receiver switch set for NT1 fits directly into composite receiver case. Pre wired mechanical on/off switch for quick & easy powering/shutdown of onboard electronics. Molded rubber cover protects switch from contamination by fuel and dirt. Comes with Futaba J connectors. 

Smart and functional personal transponder mounting plate made from premium-quality graphite material. Includes mounting hardware for easy attachment to NT1 radio plate. 

CNC-machined 8.4mm dia. mounting pivot ball, made from premium lightweight
7075 T6 aluminum. Set of 4.

A single alu pivot ball is 63% lighter than the steel counterpart; total combined weight saving of 18.8 grams on a car.
 

Alu M10 adjusting nut for capturing pivot balls in front steering blocks and rear uprights. Set of 4. 

Molded composite ball cups for cushioning alu M10 alu adjusting nuts against 8.4mm pivot balls. Set of 8. 

Titanium 8.4mm pivot balls, ultra-precision hand ground for high durability and long life. Set of 4. 

High-strength 15T pinion gear (1st gear) for the XRAY NT1 are made from tough 7075 T6 alu and specially hardcoated for supreme strength, light weight, and high durability. Created on a special gear machine, all pinions feature ultra-precise tooth shaping and ultra-true running for vibration-free operation.  

High-strength 16T pinion gear (1st gear) for the XRAY NT1 are made from tough 7075 T6 alu and specially hardcoated for supreme strength, light weight, and high durability. 

High-strength 17T pinion gear (1st gear) for the XRAY NT1 are made from tough 7075 T6 alu and specially hardcoated for supreme strength, light weight, and high durability.  

High-strength 19T pinion gear (1st gear) for the XRAY NT1 made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability.  

High-strength 20T pinion gear (2nd gear) for the XRAY NT1 are made from tough 7075 T6 alu and specially hardcoated for supreme strength, light weight, and high durability.  

High-strength 21T pinion gear (2nd gear) for the XRAY NT1 are made from tough 7075 T6 alu and specially hardcoated for supreme strength, light weight, and high durability. 

High-strength 22T pinion gear (2nd gear) for the XRAY NT1 are made from tough 7075 T6 alu and specially hardcoated for supreme strength, light weight, and high durability.  

High-strength 24T pinion gear (2nd gear) for the XRAY NT1 made from tough 7075 T6 alu, specially hardcoated for supreme strength, light weight, and superior durability. 

High-strength 25T pinion gear (2nd gear) for the XRAY NT1 made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability.  

Clutch spring for XCA clutch. 

Medium clutch spring for XCA clutch allows for later clutch engagement at medium RPM. Beneficial on open, high-speed tracks with high traction. 

CNC-machined graphite rear inserts for RX8 chassis. Made from thick, CNC-machined premium-grade graphite. 

Precision-machined brass chassis balancing weight. Designed for XRAY RX8 chassis with front and rear weight integration hole. Marked with the weight value for easy identification.  

Precision-machined brass chassis balancing weight. Designed for XRAY RX8 chassis with front and rear weight integration hole. Marked with the weight value for easy identification.  

Precision-machined brass chassis balancing weight. Designed for XRAY RX8 chassis with front and rear weight integration hole. Marked with the weight value for easy identification.  

Precision-machined brass chassis balancing weight. Designed for XRAY RX8 chassis with front and rear weight integration hole. Marked with the weight value for easy identification.  

CNC-machined graphite front insert for RX8 chassis to adjust chassis flex. Made from thick, CNC-machined premium-grade graphite. 

Alu front body posts for XRAY RX8 are CNC-machined from premium lightweight Swiss 7075 T6 aluminum. Alu body posts fit on composite or graphite holder. 

Graphite rear body centering plate set. Tough, strong, and lightweight rear centering plate for RX8 made from thick, CNC-machined, top-grade graphite. 

Alu right upper suspension holder. CNC-machined from highest-grade Swiss 7075 T6 aluminum. Composite front upper suspension eccentric bushings included. 

Alu left upper suspension holder. CNC-machined from highest-grade Swiss 7075 T6 aluminum. Composite front upper suspension eccentric bushings included. 

Front shock tower CNC-machined from thick 2.5mm, premium-quality graphite material to provide maximum strength and long life.  

Front upper suspension arm made from new hard composite material, used on either left or right side.  

Optional front upper suspension arm made from special graphite composite material, works on either left or right side. 

Front upper arms are made from softer material for improved steering characteristics as well as better forward traction. 

Front lower suspension arm graphite extension for use with #342111 Composite Suspension Arm. 

Molded-composite right steering block for XRAY RX8 with built-in +1° kingpin angle. Marked "R" and "+" for easy identification. Use with matching #342221 left steering block. 

Molded-composite right steering block for XRAY RX8 with built-in -1° kingpin. Marked "R" and "–" for easy identification. Use with matching #342222 left steering block. 

Re-designed molded composite RIGHT steering block with 2 extra eccentric positions, making a total of 6 different roll center positions. Additional holes allow the mounting of graphite aerodynamic disks.  

Molded-composite left steering block for XRAY RX8 with built-in +1° kingpin angle. Marked "L" and "+" for easy identification. Use with matching #342211 right steering block. 

Molded-composite left steering block for XRAY RX8 with built-in –1° kingpin angle. Marked "L" and "–" for easy identification. Use with matching #342212 right steering block. 

Re-designed molded composite LEFT steering block with 2 extra eccentric positions, making a total of 6 different roll center positions. Additional holes allow the mounting of graphite aerodynamic disks.  

The aluminum front anti-roll bar for the XRAY RX8 allows you to adjust the anti-roll bar independently from downstop, so that the downstop setting does not influence the performance of the anti-roll bar and vice versa. 

Aluminum front anti-roll bar for the XRAY RX8 allows you to adjust the anti-roll bar independently from downstop, so that the downstop setting does not influence the performance of the anti-roll bar and vice versa. Orange color. 

Front anti-roll bar manufactured from special spring steel material, black color. Recommended for use at smaller, more technical tracks when the car needs to quickly change direction and transfer weight.  

Front anti-roll bar manufactured from special spring steel material, black color. Recommended for use at smaller, more technical tracks when the car needs to quickly change direction and transfer weight.  

Front anti-roll bar manufactured from special spring steel material, black color. Recommended for use at smaller, more technical tracks when the car needs to quickly change direction and transfer weight. 

Alu servo saver arms allow quick and easy adjustment of steering Ackermann at the central servo saver. 4 settings available. Ultra-strong construction for increased lifespan and durability. CNC-machined from premium Swiss 7075 T6 aluminum. 

Alu servo saver arms CNC-machined from premium Swiss 7075 T6 aluminum. Allows for quick & easy adjustment of steering Ackermann at the central servo saver. 4 settings available. Ultra-strong construction for increased lifespan and durability. Orange color. 

Alu lower suspension holder. Ultra-strong construction for increased lifespan and durability. CNC-machined from highest-grade Swiss 7075 T6 aluminum. 

Rear lower suspension arm made from new hard composite material, used on either left or right side.  

Rear lower suspension arm made from special composite material, can be used on either left or right side.  

Rear upper suspension arm made from new hard composite material. 

Optional rear upper suspension arm made from special graphite composite material, works on either left or right side.  

Rear anti-roll bar manufactured from special spring steel material, black color. The wire anti-roll bar is mounted to the bulkheads from outside, for quick & easy changes and adjustment.  

Rear anti-roll bar manufactured from special spring steel material, black color. The wire anti-roll bar is mounted to the bulkheads from outside, for quick & easy changes and adjustment.  

Lightweight, heat-treated and precision-ground ventilated brake disc for RX8.  

CNC-machined brake disk adapter made from tough 7076 T6 alu. Includes factory-pressed pins (non-replaceable). 

CNC-machined brake disk adapter made from tough 7076 T6 alu. Includes factory-pressed pins (non-replaceable). 

For serious racers who are conscious of weight savings, XRAY offers lightweight CNC-machined diff outdrive adapters made from tough HUDY Spring Steel™.  

Rear solid axle set includes lightweight axle shaft, pulley, and hardware. Axle body is manufactured from HUDY Spring Steel™ and has been strategically machined 25% lighter than standard #345110 rear solid axle shaft. 

CNC-machined lightweight rear solid axle shaft. Axle body is manufactured from HUDY Spring Steel™ and has been strategically machined 25% lighter than standard #345110 rear solid axle shaft. 

CNC-machined CVD drive axles for RX8 made from premium lightweight Swiss 7075 T6 hardcoated aluminum. Strategically-machined, super-lightweight drive axle are specially designed and produced for high-competition racing.  

Alu shims. ID x OD x thickness = 12 x 15 x 1.0mm. Set of 4. 

CNC-machined rear CVD drive shaft set for RX8 made from world-renown HUDY Spring Steel™. Hand ground for maximum precision, then individually measured and inspected. 

Rear drive axle for RX8 CNC-machined from world-renowned, top-secret HUDY Spring Steel™.  

CNC-machined CVD drive axle for RX8 made from premium lightweight Swiss 7075 T6 hardcoated aluminum. Strategically-machined, super-lightweight drive axles are specially designed and produced for high-competition racing.  

CNC-machined CVD rear drive shaft made from world-renown HUDY Spring Steel™. Hand ground for maximum precision, then individually measured and inspected. 

High-performance front drive belt 6.0 x 204mm. 

Optional specially-modified high-performance front drive belt.  

High-performance side drive belt 6.0 x 432mm. 

High-performance rear drive belt 8.0 x 204mm. 

Optional specially-modified high-performance rear drive belt. 

Complete 2-speed transmission set. Includes 46T and 49T molded composite spur gears, 2nd gear shoe set, alloy gear holders with integrated bearings, and all hardware.
The 2-speed transmission parts are installed on a precision-manufactured super-smooth lightweight hollow middle layshaft made from tough HUDY shaft steel for 2-speed, which is additionally heat treated for extra strength and long life.  

2nd gear carrier (drum) CNC-machined from tough Swiss 7075 T6 alu. Orange color. 

2nd gear carrier (drum) CNC-machined from premium aluminum material. 

1st gear drive flange CNC-machined from tough Swiss 7075 T6 alu. Includes factory-pressed (non-replaceable) high-quality German one-way bearing, hand-ground for maximum running precision and strength.  

1st gear drive flange CNC-machined from tough Swiss 7075 T6 aluminum. Includes factory-pressed (non-replaceable) high-quality German one-way bearing, hand-ground for maximum running precision and strength. 

2-speed gearbox shoe set. Includes composite shoes, adjusting screws, roller pins, and hardware. 

Molded composite 2-speed gearbox shoes made from special composite mixture. 

XRAY precision-molded 45T spur gear (2nd gear, module 1) made from special composite material with optimal balance of hardness, toughness, and flexibility. Gives long life, minimal wear, and minimizing breakage and teeth stripping. Strategically lightened to reduce rotating mass.  

XRAY precision-molded 47T spur gear (2nd gear, module 1) made from special composite material with optimal balance of hardness, toughness, and flexibility. Gives long life, minimal wear, and minimizing breakage and teeth stripping. Strategically lightened to reduce rotating mass.  

XRAY precision-molded 47T spur gear (2nd gear, module 1) made from special composite material with optimal balance of hardness, toughness, and flexibility. Gives long life, minimal wear, and minimizing breakage and teeth stripping. Strategically lightened to reduce rotating mass. 

XRAY precision-molded 48T spur gear (1st gear, module 1) made from special composite material with optimal balance of hardness, toughness, and flexibility. Gives long life, minimal wear, and minimizing breakage and teeth stripping. Strategically lightened to reduce rotating mass. 

XRAY precision-molded 49T spur gear (1st gear, module 1) made from special composite material with optimal balance of hardness, toughness, and flexibility. Gives long life, minimal wear, and minimizing breakage and teeth stripping. Strategically lightened to reduce rotating mass. 

XRAY precision-molded 50T spur gear (1st gear, module 1) made from special composite material with optimal balance of hardness, toughness, and flexibility. Gives long life, minimal wear, and minimizing breakage and teeth stripping. Strategically lightened to reduce rotating mass. 

2-speed shoe adapter CNC-machined from high-tensile steel. 

Spring for Composite 2-Speed Gearbox Set. Set of 2. 

Strategically-lightened alu locating collar made from tough 7076 T6 alu replaces the composite collar used on the 2-speed shaft. Rotating mass is reduced without sacrificing strength or durability. 

Strategically-lightened alu locating collar made from tough 7076 T6 aluminum replaces the composite collar used on the 2-speed shaft. Rotating mass is reduced without sacrificing strength or durability. Orange color. 

Alu shims, 8x10mm and 1.5mm thick, for smaller 2-speed. Black color. Set of 10. 

Steel shims, 8x10mm and 1.5mm thick, for smaller 2-speed. Made from steel for improved durability and more consistent work of the alu drive flange with 1-way bearing.  

XRAY precision-molded spur gear (2nd gear, module 1). 

XRAY precision-molded spur gear (2nd gear, module 1). 

XRAY precision-molded spur gear (2nd gear, module 1). 

XRAY precision-molded spur gear (1st gear, module 1). 

XRAY precision-molded spur gear (1st gear, module 1). 

XRAY precision-molded spur gear (1st gear, module 1). 

Alu front middle shaft holder for XRAY RX8 includes alu lightweight collar - short, composite bushings and 6x13 high-speed ball-bearings. 

Stylish-lightened alu locating collar for #345721 alu front middle shaft holder made from tough 7076 T6.  

Set of molded composite pulley covers and collars made from specially-formulated graphite composite mixture for increased strength and lower weight.  

Complete set of precision-molded, low-friction composite belt pulleys + covers and collars made of specially-formulated graphite composite material that is a perfect balance of reliability and performance.  

Precision-molded, low-friction composite 20T belt pulley on main layshaft, drives rear belt. 

Precision-molded, low-friction composite 18T side belt pulley on 2-speed shaft, drives side belt (at rear).  

Precision-molded, low-friction composite 18T front belt pulley on inside of middle shaft, drives front belt.  

Precision-molded, low-friction composite 28T side belt pulley on outside of middle shaft, driven by side belt.  

Precision-molded, low-friction composite 29T side belt pulley on outside of middle shaft, driven by side belt.  

Alu 20T belt pulley on main layshaft drives rear belt. CNC-machined from premium lightweight Swiss 7075 T6 aluminum, hardcoated for extra durability and long lifespan and has been strategically lightened. 

Alu 18T side belt pulley on main layshaft drives side belt. CNC-machined from premium lightweight Swiss 7075 T6 aluminum, hardcoated for extra durability and long lifespan and has been strategically lightened.  

Alu 18T front belt pulley on middle shaft, drives front belt. CNC-machined from premium lightweight Swiss 7075 T6 aluminum, hardcoated for extra durability and long life and has been strategically lightened. 

Alu 28T side belt pulley. CNC-machined from premium lightweight Swiss 7075 T6 aluminum, hardcoated for extra durability and long life and has been strategically lightened. 

Alu 29T side belt pulley. CNC-machined from premium lightweight Swiss 7075 T6 aluminum, hardcoated for extra durability and long life and has been strategically lightened.  

Alu 30T side belt pulley. CNC-machined from premium lightweight Swiss 7075 T6 aluminum, strategically lightened, and hardcoated for extra durability and long life.  

Exclusive LiPo tray designed to accommodate lower weight LiPo receiver battery packs (lighter than standard NiMH receiver battery packs).  

Alu radio plate mounts allow more solid radio plate mounting while reducing the chance of stripped threads.  

Alu hardcoated rear body holder arm pins are CNC-machined from premium lightweight Swiss 7075 T6 aluminum and has been strategically lightened by 63% compared to the standard #347330 arm pin. Hardcoated for extra durability and long life.  

Ultimate-match front shock springs for XRAY shocks. Stylish black finish. Laser-engraved value on top spring coil for easy identification. Set of 2. 

Ultimate-match front shock springs for XRAY shocks. Stylish black finish. Laser-engraved value on top spring coil for easy identification. Set of 2. 

Ultimate-match shock springs (C=8.5) for XRAY shocks. Stylish black finish. Laser-engraved value (8.5) on top spring coil for easy identification. Set of 2. 

Ultimate-match front shock springs for XRAY shocks. Stylish black finish. Laser-engraved value on top spring coil for easy identification. Set of 2. 

Ultimate-match front shock springs for XRAY shocks. Stylish black finish. Laser-engraved value on top spring coil for easy identification. Set of 2. 

Ultimate-match rear shock springs for XRAY shocks. Stylish black finish. Laser-engraved value on top spring coil for easy identification. Set of 2. 

Ultimate-match shock springs (C=6.3) for XRAY shocks. Stylish black finish. Laser-engraved value (6.3) on top spring coil for easy identification. Set of 2. 

High-strength 17T pinion 1st gear made from tough 7075 T6 alu, large and specially hardcoated for superior strength, high durability and long life. 

High-strength 18T pinion 1st gear made from tough 7075 T6 alu, large and specially hardcoated for superior strength, high durability and long life. 

High-strength 19T pinion 1st gear made from tough 7075 T6 alu, large and specially hardcoated for superior strength, high durability and long life. 

High-strength 22T pinion 2nd gear made from tough 7075 T6 alu, large and specially hardcoated for superior strength, high durability and long life. 

High-strength 23T pinion 2nd gear made from tough 7075 T6 alu, large and specially hardcoated for superior strength, high durability and long life. 

High-strength 24T pinion 2nd gear made from tough 7075 T6 alu, large and specially hardcoated for superior strength, high durability and long life. 

High-strength 25T pinion 2nd gear made from tough 7075 T6 alu, large and specially hardcoated for superior strength, high durability and long life. 

Complete XCA (XRAY Centrifugal-Axial) clutch set. Easily-adjustable 3-shoe XCA (XRAY Centrifugal-Axial) clutch features clutchbell, clutch nut, flywheel nut and thrustbearing collar made from exclusive HUDY Spring Steel™; hardcoated flywheel, clutch disc and spring cup made from premium Swiss 7075 T6. 

Ultra-strong CNC-machined XCA clutchbell made from special HUDY Steel. Universal design allows quick & easy changing of threaded pinion gears. 

Lightweight XCA alu clutchbell made from CNC-machined premium Swiss 7075 T6 aluminum, nickel coated. 

High-strength 15T pinion gear (1st gear) made from tough 7075 T6 alu and specially hardcoated for superior strength, light weight, and high durability. 

High-strength 16T pinion gear (1st gear) made from tough 7075 T6 alu and specially hardcoated for superior strength, light weight, and high durability.  

High-strength 17T pinion gear (1st gear) made from tough 7075 T6 alu and specially hardcoated for superior strength, light weight, and high durability.  

High-strength 18T pinion gear (1st gear) made from tough 7075 T6 alu and specially hardcoated for superior strength, light weight, and high durability.  

High-strength 19T pinion gear (2nd gear) made from tough 7075 T6 alu and specially hardcoated for superior strength, light weight, and high durability.  

High-strength 20T pinion gear (2nd gear) made from tough 7075 T6 alu and specially hardcoated for superior strength, light weight, and high durability.  

High-strength 21T pinion gear (2nd gear) made from tough 7075 T6 alu and specially hardcoated for superior strength, light weight, and high durability.  

New flywheel with 3mm smaller diameter is lighter than previous versions, offers improved engine bottom power and acceleration.  

New conical clutch washer springs offer more consistent clutch operation for maximum punch.  

CNC-machined red clutch shoe for XCA clutch. Material in this clutch shoe is hard and provides less slippage and wear rate. Recommended for medium- and high-traction tracks. 

Alu monoblock engine mount provides solid engine mounting and easy adjustment. Monoblock design is stiffer than standard single engine mounts.  

XRAY optional brass engine mount for RX8 provides solid engine mounting and easy adjustment. 

Engine mounts made from brass. Set of 2 matched mounts that attach to main chassis plate. These mounts are used as chassis weights and the total weight is 75g. 

Set of two (2) XCA-clutch pinion gear tools aids in installing and removing XCA clutchbell pinion gears.  

XCA-clutch pinion gear tool aids in installing & removing XCA clutchbell pinion gears. 

Thick silicone fuel tubing. 2.4mm ID, 1m length. Fluorescent yellow colour. 

XRAY Premium Silicone Oil 100 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 150 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 200 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 250 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 300 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 350 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 400 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 450 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 500 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 550 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 700 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 800 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 900 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 1000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

Titanium pins, ultra-precision hand ground for high durability and long life. More than 40% lighter compared to standard steel pins.